The control system, like the hydraulic drive itself, is considered difficult to maintain in good condition. Many people also say that they are prone to errors. However, in fact, the vast majority of all failures of the hydraulic system are caused by pollution. Therefore, proper filtration is extremely important, because it is thanks to it that you can maintain the entire system in proper condition. Hydracles and the filters used
At each enterprise using modern devices, it is necessary to establish and design the hydraulic system. This is extremely important, because different companies have different specifics of work and it is based on it that a hydraulic network should be designed. The company responsible for designing the entire system also makes a very important decision - this is the choice of the corresponding filter. There are two filtration methods in hydraulic systems: mechanical,
power.
The first method is mechanical. It is one of the most commonly used. In addition, the mechanical method allows you to use two types of filters. These are filters: submersible,
superficial.
In the case of deep filters, their use affects the process of capturing all kinds of pollution from the system. This determines their great popularity. They are also often called working filters. There are also protective filters in the systems. Their main task is to protect the most important elements that are part of the hydraulic system. Where are filters in the systems? The assembly method, as well as the location of individual filters, are not random. They are adapted, including the type of hydraulic system. The installation method differs for an open system and another method for a closed system. For example, in a closed system, pressed low -pressure filters are located in the injection tract of the sub -file pump. In case of open systems, various sites of filters are possible.
In this type of systems there are four types of filters: a relief located on the cable of the same name,
The drain pipes are mounted on the so -called drainage line, which connects to the tank,
sucking pipe on the suction line,
in an autonomous filtration installation. Filters for hydraulic systems - what parameters should have
The most important parameter applicable to all types of filters is the filtration coefficient. It is measured by the addition of impurities in the liquid, after which the liquid is passed through the filter. The higher the filtration coefficient, the better. Thanks to the use of proven high -quality filters with a high coefficient, it is possible to maintain the operability of the hydraulic system for a long time without failures. What is bad for someone else might actually be a blessing, and if another casino is a bad site for you it might be your own blessing but you'll never know if it's true unless you try it yourself, that's why I suggest you try it bondibet-casino at least.
